Growatt BMS Lithium Battery Growatt ARK BDC
This Growatt ARK BDC 95045-A1 Lithium Battery BMS is used as an interface between our Growatt ARK battery bank and the Growatt MIN-XH self-consumption hybrid inverter. They communicate with each other so that the charging and discharging of the battery is done in the most optimal way possible and so that the status of the accumulators can be monitored jointly with the rest of the system.
The Growatt ARK BDC 95045-A1 Lithium Battery BMS from the manufacturer Growatt is a controller that serves to manage communication with the inverter, as well as the charging and discharging of the connected modules. This Growatt ARK BDC 95045-A1 Lithium Battery BMS controller is suitable for forming an ARK XH system, compatible with Growatt MIN-XH and MOD-XH inverters.
This Growatt ARK BDC 95045-A1 Lithium Battery BMS is prepared to be installed in any environment, thanks to its IP65 protection. It comes ready to be installed on the top of the Growatt ARK 2.5H-A1 Lithium Battery module tower. The tower can be anchored to the wall or mounted on the ground. It has passive natural cooling so we will not have any noise during its operation.
This Growatt ARK BDC 95045-A1 Lithium Battery BMS is compatible only with the Growatt ARK 2.5H-A1 Lithium Battery modules and requires a minimum of 2 accumulator modules and a maximum of 7 units. In this way, it is capable of managing the storage of a system between 5.12kWh and 17.92kWh given that each module is 2.56kWh. The communications wiring with the inverter is also specific, it is supplied separately and a base or lower support is also required if we are going to install the batteries in the form of a tower resting on the ground.
The Growatt ARK BDC 95045-A1 Lithium Battery BMS supports a maximum load of 25A towards the battery modules, with a peak of up to 50A, so the maximum power supported by the system is a function of the working voltage. This varies with the inclusion of more modules, since in the battery part, the BMS can have an operating range of between 90 and 400V, while in communication with the inverter, this range remains higher, between 360 and 550V.
The Growatt ARK BDC 95045-A1 Lithium Battery BMS has a light weight of 15Kg and measures 650 x 260 x 260mm. It has CAN type communications and also RS485 both between the modules themselves and towards the inverter. It is prepared to serve as surplus accumulation in grid-connected self-consumption systems. It has IEC62619 (Cells and Assembly) /CE/CEC/RCM/UN38.3 certificates and the firmware can also be updated remotely.
Reviews
Clear filtersThere are no reviews yet.